| 挤齿精化机理分析 |
| |
| 引用本文： | 申屠高雄,金寿松.挤齿精化机理分析[J].浙江工业大学学报,1998,26(3):210-214. |
| |
| 作者姓名： | 申屠高雄 金寿松 |
| |
| 作者单位： | 浙江工业大学机电学院!杭州，310032，浙江工业大学机电学院!杭州，310032 |
| |
| 摘 要： | 针对6级精度以下渐开线齿轮提出挤齿代替磨齿的构思，并从齿面正压力、摩擦力、重合度、螺旋角、胶合、冷作强化等方面分析挤告精化机理，用经改装的接触疲劳试验机验证了该方法的可行性。
|
| 关 键 词： | 渐开线齿轮 精化 机理 |
Analysis of Mechanism for Finishing Profile by Compressing Tooth to Tooth |
| |
| Shentu Gaoaiong, Jin Shousong.Analysis of Mechanism for Finishing Profile by Compressing Tooth to Tooth[J].Journal of Zhejiang University of Technology,1998,26(3):210-214. |
| |
| Authors: | Shentu Gaoaiong Jin Shousong |
| |
| Abstract: | A method of finishing profile by compressing tooth to tooth, instead Of banding, is put forward for the gears with accuracy class up to 6. Moreover the mechanism anal}'sis about normal pressure.friction.coincidence freqUency.helix angle.gluing.cold hardening and so on is made. Feasibility of ibis method is verified with a contact-fatigUe-test machine refitted. |
| |
| Keywords: | Involute gear Finishing Mechanism |
| 本文献已被 CNKI 维普 等数据库收录！ |
