|
|||||
|
|
| X波段速调管功率合成输出结构研究(TE01模输出窗设计) | |
| 引用本文： | 孙鹏,丁耀根,赵鼎. X波段速调管功率合成输出结构研究(TE01模输出窗设计)[J]. 电子与信息学报, 2008, 30(2): 501-504. DOI: 10.3724/SP.J.1146.2006.01187 |
| 作者姓名： | 孙鹏 丁耀根 赵鼎 |
| 作者单位： | 1. 中国科学院电子学研究所,北京,100080;中国科学院研究生院,北京,100039 2. 中国科学院电子学研究所,北京,100080 |
| 摘 要： | 在对X波段高峰值功率微波源迫切需求的牵引下,该文为X波段高峰值功率速调管功率合成输出结构设计了一个工作在9GHz的TE01模输出窗,输出窗相对带宽大于7%,通带内插入驻波比小于1.2.此外,该文还建立了TE01模输出窗窗片稳态温度分布的计算方法.理论分析表明,该输出窗传输50MW的高峰值功率不会由于温升而出现窗片的破裂. |
| 关 键 词： | 速调管 高功率输出窗 温升效应 波段 速调管 功率合成 输出窗 结构研究 窗设计 Klystron High Power Window 破裂 温升 传输 分析表 理论 计算方法 温度分布 稳态 驻波比 通带 相对带宽 |
| 文章编号： | 1009-5896（2008）02-0501-04 |
| 收稿时间： | 2006-08-11 |
| 修稿时间： | 2007-05-28 |
Design of TE01 Window for X-Band High Power Klystron |
|
| Sun Peng,Ding Yao-gen,Zhao Ding. Design of TE01 Window for X-Band High Power Klystron[J]. Journal of Electronics & Information Technology, 2008, 30(2): 501-504. DOI: 10.3724/SP.J.1146.2006.01187 | |
| Authors: | Sun Peng Ding Yao-gen Zhao Ding |
| Affiliation: | Instte of Electronics, Chinese Academy of Sciences, Beijing 100080, China; Graduateitu University of the Chinese Academy of Sciences, Beijing 100039, China |
| Abstract: | In this paper, an X-band TE01 output window is designed, which is suitable for high power klystron. TE01 window has its uniqueness to avoid voltage breakdown due to its mode pattern and window structure. Center frequency for this window is 9GHz and bandwidth can reach as high as 7% with standing wave ratio below 1.2:1. Theory about heating effect on the designed window has been established, which shows that window cracking due to temperature gap will not occur when high power microwave with its peak value of 50MW, pulse length of 1.5μs and repetition rate of 180Hz is passing through. |
| Keywords: | Klystron High power output window Heating effect |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
| 点击此处可从《电子与信息学报》浏览原始摘要信息 | |
| 点击此处可从《电子与信息学报》下载全文 | |