Surface-Enhanced Raman Scattering from Polyimide Model Compounds on Functionalized Metal Surfaces. Part II: Phthalic Anhydride/meta-Aminothiophenol/Silver

The interphase between a polyimide and a metal substrate was modeled by depositing phthalic anhydride (PA) onto a silver substrate pretreated with meta-aminothiophenol (m-ATP) and then curing in a mixture of acetic anhydride and pyridine or triethylamine. Surface-enhanced Raman scattering (SERS) and reflection-absorption infrared spectroscopy (RAIR) were used to determine the molecular structure of the interphase. It was found that m-ATP was adsorbed dissociatively onto silver substrates through the thiol groups. The tilt angle for m-ATP molecules adsorbed on silver substrates was determined using RAIR to be approximately 39°. However, there was no preferred rotational angle of the adsorbed APDS molecules about the molecular axes. When PA was deposited onto m-ATP pretreated silver substrates, anhydride groups of PA reacted with amino groups of m-ATP to form amic acids. When PA/m-ATP/Ag samples were chemically cured in acetic anhydride and pyridine or triethylamine, isoimide was the predominant product regardless of the use of pyridine or triethylamine as catalyst. These results were different from those obtained from PA/APDS/Au systems in which imide was the major product in the presence of triethylamine. These differences in the relative composition of cured products between two model systems were explained by the effect of substituents attached to APDS and m-ATP benzene rings.