首页 | 本学科首页   官方微博 | 高级检索  
     

匀速加热过程中第二相的扩散溶解
引用本文:王晓颖,张瑞杰,介万奇. 匀速加热过程中第二相的扩散溶解[J]. 金属学报, 2004, 40(4): 434-438
作者姓名:王晓颖  张瑞杰  介万奇
作者单位:西北工业大学凝固技术国家重点实验室,西安,710072;河南科技大学材料工程系,洛阳,471039;西北工业大学凝固技术国家重点实验室,西安,710072
基金项目:国家自然科学基金资助项目59930130
摘    要:通过求解匀速升温条件下的扩散方程,建立了匀速加热过程中扩散控制的第二相溶解模型,给出了基体中的溶质分布及第二相溶解速度的解析表达式.以Al—5.8%Cu合金为例的计算结果表明,第二相的形态和加热速率显著影响基体中的溶质分布和第二相的溶解速度.Al—5.8%Cu合金的热分析和液淬实验结果验证了所建模型的合理性.

关 键 词:匀速加热过程  加热速率  扩散  第二相  溶解
文章编号:0412-1961(2004)04-0434-05
收稿时间:2003-04-16
修稿时间:2003-07-01

DISSOLUTION OF THE SECOND PHASE DURING CONTINUOUS HEATING PROCESS
WANG Xiaoying,ZHANG Ruijie,JIE Wanqi. DISSOLUTION OF THE SECOND PHASE DURING CONTINUOUS HEATING PROCESS[J]. Acta Metallurgica Sinica, 2004, 40(4): 434-438
Authors:WANG Xiaoying  ZHANG Ruijie  JIE Wanqi
Affiliation:State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072
Abstract:A dissolution model of the plate-like and spherical second phases in the multiphase alloy during continuous heating process with constant rate has been proposed. The effects of heating rate and interface curvature on the concentration profiles in the matrix and the dissolution rate of the second phase were discussed. The model was applied to calculate the dissolved fraction of the second phase before melting during heating process. The calculated results for Al-5.8%Cu alloys, where the eutectic melting fraction of the non-equilibrium eutectic was determined by DSC analysis, agree well with the experimental ones, clearly indicating the validity of the developed model.
Keywords:continuous heating process   heating rate   diffusion   second phase   dissolution  
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《金属学报》浏览原始摘要信息
点击此处可从《金属学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号