| 36Mn2V管坯钢表面裂纹形态分析及成因探讨 |
| |
| 引用本文： | 刘超群,梁艳,武迪,刘利,张迎秋. 36Mn2V管坯钢表面裂纹形态分析及成因探讨[J]. 中国冶金, 2015, 25(11): 56-60. DOI: 10.13228/j.boyuan.issn1006- 9356.20140344 |
| |
| 作者姓名： | 刘超群 梁艳 武迪 刘利 张迎秋 |
| |
| 作者单位： | 1. 莱芜钢铁集团有限公司特钢事业部， 山东 莱芜 271105 2. 莱芜钢铁集团有限公司宽厚板事业部， 山东 莱芜 271105 |
| |
| 摘 要： | 36Mn2V管坯钢常用于生产石油管钢，这种材质的石油套管是石油钻探用重要器材，属裂纹敏感性钢种，容易出现表面裂纹现象。通过对轧材表面裂纹缺陷部位进行金相组织观察、扫描电镜分析，发现裂纹附近组织存在明显的脱碳现象及夹杂物和氧化物圆点，并且裂纹末端存在多条铁素体条带，结果表明连铸坯本身存在的质量缺陷是36Mn2V圆钢产生表面裂纹的主要原因。
|
| 关 键 词： | 36Mn2V 表面裂纹 脱碳 氧化物圆点 |
Cause and analysis of surface crack on the tube billet 36Mn2V |
| |
| LIU Chao- qun,LIANG Yan,WU Di,LIU Li,ZHANG Ying- qiu. Cause and analysis of surface crack on the tube billet 36Mn2V[J]. China Metallurgy, 2015, 25(11): 56-60. DOI: 10.13228/j.boyuan.issn1006- 9356.20140344 |
| |
| Authors: | LIU Chao- qun LIANG Yan WU Di LIU Li ZHANG Ying- qiu |
| |
| Affiliation: | （1. Special Steel Division, Laiwu Iron and Steel Group Co., Ltd., Laiwu 271105, Shandong, China 2. Heavy Plate Plant Business Unit, Laiwu Iron and Steel Group Co., Ltd., Laiwu 271105, Shandong, China） |
| |
| Abstract: | The tube billet 36Mn2V is usually used to produce the oil well pipe, which is the important equipment for oil drilling. However, this steel belongs to one of cracking sensitive steel grades, and the surface crack easily occurs. The surface crack defects of rolled product were investigated by metallographic structure and scanning electron microscope analysis. It was found that the obvious decarburized layer, inclusions and oxide dots were observed near the structure of crack. Moreover, many ferrite bands existed at the end of the crack. The results indicated that the quality defect of the casting billet was the main reason to cause the surface crack on the billet 36Mn2V. |
| |
| Keywords: | 36Mn2V surface crack decarburized oxide dot |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国冶金》浏览原始摘要信息 |
|
点击此处可从《中国冶金》下载全文 |
|
