Strength of cold-formed lipped channel beams under interaction of local,distortional and lateral torsional buckling

Cold-formed thin-walled lipped channel steel beams may undergo buckling modes such as short half-wavelength local buckling, intermediate half-wavelength distortional buckling and long half-wavelength lateral-torsional buckling or a combination of these before failure. ABAQUS software based on finite element analysis is used to analyse the interaction behaviour of these buckling modes in this study. The finite element model, after calibration with experimental results available in the literature, is used to perform parametric studies, to evaluate the behaviour and strength of such beams under different types of interactions due to variation of material and member properties. The large volume of synthetic data thus generated over a range of failure modes along with the available test results are used to evaluate different equations for calculating the strength of such cold-formed lipped channel beams. Based on the comparison, a method for the design of lipped channel beams failing under the interaction of local, distortional and overall lateral torsional buckling is recommended.