| 纺丝原料对高强高模聚乙烯醇纤维结构性能的影响 |
| |
| 引用本文： | 祁玉冬,徐建军,叶光斗,李守群.纺丝原料对高强高模聚乙烯醇纤维结构性能的影响[J].合成纤维工业,2007,30(2):14-16. |
| |
| 作者姓名： | 祁玉冬 徐建军 叶光斗 李守群 |
| |
| 作者单位： | 四川大学高分子科学与工程学院高分子材料工程国家重点实验室,四川,成都,610065 |
| |
| 摘 要： | 研究了纺丝原料聚合度、转化率对聚乙烯醇(PVA)纤维高强高模化的影响。结果表明:高聚合度有利于减少端基缺陷,提高纤维性能;低转化率PVA相对高转化率PVA具有高的聚合度和线性程度,所得纤维力学性能更高。同时发现,低转化率原料纺得纤维在高倍拉伸后有强度模量较高的横纹丝产生,因此适合制备高强高模纤维。
|
| 关 键 词： | 聚乙烯醇纤维 聚合度 转化率 高强高模纤维 力学性能 结构 |
| 文章编号： | 1001-0041(2007)02-0014-03 |
| 修稿时间： | 2006-08-30 |
Effect of feedstocks on structure and properties of high-strength high-modulus polyvinyl alcohol fiber |
| |
| Qi Yudong,Xu Jianjun,Ye Guangdou,Li Shouqun.Effect of feedstocks on structure and properties of high-strength high-modulus polyvinyl alcohol fiber[J].China Synthetic Fiber Industry,2007,30(2):14-16. |
| |
| Authors: | Qi Yudong Xu Jianjun Ye Guangdou Li Shouqun |
| |
| Abstract: | The effects of the polymerization degree and conversion rate of the feedstocks on the high-strength high-modulus poly- vinyl alcohol fiber were studied.The results showed that the PVA with high polymerization degree had better mechanical proper- ties due to its less defects in end groups.PVA with low conversion had higher polymerization degree and linear degree as com- pared with PVA with high conversion;hence,the fiber prepared from PVA with low conversion had higher mechanical properties and the across line showing high strength and modulus was observed after drawing at high ratios.The PVA with low conversion was a proper raw materical for producing high-strength high-modulus fiber. |
| |
| Keywords: | polyvinyl alcohol fiber polymerization degree conversion rate high-strength and high-modulus fiber mechanical properties structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
