| 拉压强度不同材料的复合型断裂准则 |
| |
| 引用本文： | 牟宗花 杜善义. 拉压强度不同材料的复合型断裂准则[J]. 哈尔滨工业大学学报, 1995, 27(6): 38-41 |
| |
| 作者姓名： | 牟宗花 杜善义 |
| |
| 作者单位： | 哈工大材料力学教研室 |
| |
| 摘 要： | 考虑了材料拉压性能的不能对复合型断裂强度的影响，提出了巴兰金屈服面上的最大周向应力准则，并与实验结果进行了比较，结果表明：对拉压异性材料，考虑了拉压强度的不同对断裂的影响而建立的断裂准则更接近于实验值。
|
| 关 键 词： | 拉压异性 复合型 断裂准则 拉压强度 |
Fracture Criterion of Material with Different Strength in Tension and Compression Under Mixed Mode Ioading |
| |
| Mu Zhonghua, Du Shanyi, Zhang Zherhua. Fracture Criterion of Material with Different Strength in Tension and Compression Under Mixed Mode Ioading[J]. Journal of Harbin Institute of Technology, 1995, 27(6): 38-41 |
| |
| Authors: | Mu Zhonghua Du Shanyi Zhang Zherhua |
| |
| Affiliation: | Department of Astronalltics and Mechanics |
| |
| Abstract: | Considering the effect of difference between tensile strength and comprescialstrength on the fracture toughness under mixer mode loading, maxmum the circle stresscriterion on the Bainnjin yield plane was proposed. It was shown from comparingpredicting with expaerimental results that the fraCture criterion Which is based on thedifference between tensile strength and comprescial strength corresponds with theexperimental values. |
| |
| Keywords: | Different strength in tension and compressin mixed modle loading fracture criterion |
| 本文献已被 CNKI 维普 等数据库收录！ |
