| 工程车辆用单组分聚氨酯风挡玻璃密封胶的研制 |
| |
| 引用本文： | 马仁杰,王自新,王玲,徐哲.工程车辆用单组分聚氨酯风挡玻璃密封胶的研制[J].聚氨酯工业,2007,22(3):34-36. |
| |
| 作者姓名： | 马仁杰 王自新 王玲 徐哲 |
| |
| 作者单位： | 黎明化工研究院,洛阳,471001;黎明化工研究院,洛阳,471001;黎明化工研究院,洛阳,471001;黎明化工研究院,洛阳,471001 |
| |
| 摘 要： | 介绍了以聚氨酯树脂、炭黑为原料合成工程车辆用单组分聚氨酯风挡玻璃密封胶的方法。讨论了填料、催化剂、偶联剂对密封胶性能的影响。结果表明,该单组分聚氨酯风挡玻璃密封胶的拉伸强度可达到6.51MPa、伸长率550%、100%拉伸模量2.0MPa、剪切强度2.82MPa、邵A硬度51、抗下垂性0,这些指标与国外同类产品性能相似,可以取代进口产品。
|
| 关 键 词： | 密封胶 工程车辆 风挡玻璃 聚氨酯 |
| 修稿时间： | 2006-09-212007-02-06 |
Preparation of One-component Polyurethane Windscreen Sealant for Engineering Vehicle |
| |
| Ma Renjie,Wang Zixin,Wang Ling,Xu Zhe.Preparation of One-component Polyurethane Windscreen Sealant for Engineering Vehicle[J].Polyurethane Industry,2007,22(3):34-36. |
| |
| Authors: | Ma Renjie Wang Zixin Wang Ling Xu Zhe |
| |
| Affiliation: | Liming Research Institute of Chemical Industry, Luoyang 471001 |
| |
| Abstract: | The preparation method of one-component polyurethane windscreen sealant for engineering vehicle by using polyurethane resin and carbon black as raw materials was introduced. The effects of fillers, catalysts and coupling agents on the sealant were discussed. The results showed that the sealant had following performances such as tensile strength was 6.51 MPa, elongation was 550%, 100%modulus was 2.0 MPa, shear strength was 2.82 MPa, hardness shore A was 51 and sagging resistance was 0. It was similar to the imported products and could substitute. |
| |
| Keywords: | sealant mobile machinery shop windscreen polyurethane |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
