Effect of ionizing irradiation and blending of natural rubber latex on polyvinylalcohol gelation by using chemical and freezing–thawing processes for use in the field of construction engineering

The aim of this work is to study the gelation behavior of polyvinylalcohol (PVA) and natural rubber latex (NRL) using two methods: The first was chemical gelation by adding sodium borate as a crosslinking to obtain a modeling clay gel able to draw easily under tension (using drum mill) or by using hand pressing. Irradiation was then applied at 2.5 Mrad to possess more crosslinking effect, where stable and rubbery‐gel shape in the dimension was obtained. The second method, where samples of liquid PVA were frozen and thawed for three consecutive cycles. The obtained gel was quite rubbery but completely soluble in hot water at 70°C. Irradiation was performed at 2.5 Mrad to produce a highly rubbery gel and resistant to boiled water. Also, blending of NRL with PVA induced a significant increase in gel‐elasticity and resistivity to boiled water. Factors affecting the properties of the prepared gel such as gel draw ability and gel strength were studied. The study was supported with thermal and scanning electron microscopy (SEM) to investigate the modification of PVA‐gel behavior through irradiation and blending with NRL processes. The results indicated that the PVA‐gel obtained by chemical method or blended with NRL through freezing–thawing gelation gave a superior ability for cement loading. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010