Annealing‐Free High Efficiency and Large Area Polymer Solar Cells Fabricated by a Roller Painting Process

Polymer solar cells are fabricated by a novel solution coating process, roller painting. The roller‐painted film – composed of poly(3‐hexylthiophene) (P3HT) and 6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM) – has a smoother surface than a spin‐coated film. Since the roller painting is accompanied by shear and normal stresses and is also a slow drying process, the process effectively induces crystallization of P3HT and PCBM. Both crystalline P3HT and PCBM in the roller‐painted active layer contribute to enhanced and balanced charge‐carrier mobility. Consequently, the roller‐painting process results in a higher power conversion efficiency (PCE) of 4.6%, as compared to that for spin coating (3.9%). Furthermore, annealing‐free polymer solar cells (PSCs) with high PCE are fabricated by the roller painting process with the addition of a small amount of octanedi‐1,8‐thiol. Since the addition of octanedi‐1,8‐thiol induces phase separation between P3HT and PCBM and the roller‐painting process induces crystallization of P3HT and PCBM, a PCE of roller‐painted PSCs of up to 3.8% is achieved without post‐annealing. A PCE of over 2.7% can also be achieved with 5 cm² of active area without post‐annealing.