首页 | 本学科首页   官方微博 | 高级检索  
     

锌对镁锡合金组织和性能的影响
引用本文:赵浩峰,王玲,颜开,孙磊,章帅,李庆芳,雷勇. 锌对镁锡合金组织和性能的影响[J]. 稀有金属材料与工程, 2010, 39(Z1)
作者姓名:赵浩峰  王玲  颜开  孙磊  章帅  李庆芳  雷勇
作者单位:南京信息工程大学,江苏,南京,210044
摘    要:研究了锌元素对镁锡合金塑性的影响。实验合金在电阻坩埚炉中熔制,镁合金成分有Sn1~5%和Zn1.0~4.0%,并含适量钙、硅和铅。通过拉伸强度测试和冲击试验,表明合适的锌和锡含量,可使含镁合金的抗拉强度达到190MPa,伸长率可以达到18%,约是AZ91合金的伸长率(6%)的3倍,冲击韧性可达20J/cm2,是AZ91合金冲击韧性(9J/cm2)的2倍多。锌和锡元素的结合对镁合金的力学性能改善有较大的促进作用。

关 键 词:镁合金  性能    

Effect of Zinc on the Morphology and Properties of Magnesium-Tin Alloy
Zhao Haofeng,Wang Ling,Yan Kai,Sun Lei,Zhang Shuai,Li Qingfang,Lei Yong. Effect of Zinc on the Morphology and Properties of Magnesium-Tin Alloy[J]. Rare Metal Materials and Engineering, 2010, 39(Z1)
Authors:Zhao Haofeng  Wang Ling  Yan Kai  Sun Lei  Zhang Shuai  Li Qingfang  Lei Yong
Affiliation:Zhao Haofeng,Wang Ling,Yan Kai,Sun Lei,Zhang Shuai,Li Qingfang,Lei Yong (Nanjing University of Information Science & Technology,Nanjing 210044,China)
Abstract:Effect of Zn on performance of Mg-Sn alloy was studied.Mg-Sn alloy (Sn 1%-5%,Pb 0.09%,Ca 0.1%,Si 0.1%,Zn 1.0%-4.0%,Mg for the rest) was melt in an electrical resistance furnace.The test results show that the tensile strength of the Mg-Sn alloys reached 190 MPa.The elongation reached 18%,which was about 3 times of that of AZ91 alloy(6%).The impact toughness of the magnesium alloy reached 20 J/cm2,which was about 2 times of that of AZ91 alloy(9 J/cm2).Therefore,combination of Zn and Sn could greatly improve t...
Keywords:magnesium alloys  properties  Sn  Zn  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号