| 装有脱硝系统锅炉用回转式预热器设计存在问题和对策 |
| |
| 引用本文： | 蔡明坤. 装有脱硝系统锅炉用回转式预热器设计存在问题和对策[J]. 锅炉技术, 2005, 36(4): 8-12 |
| |
| 作者姓名： | 蔡明坤 |
| |
| 作者单位： | 上海锅炉厂有限公司,上海,200245 |
| |
| 摘 要： | 介绍了锅炉采用脱硝装置(SCR或SNCR)后,未耗尽氨气和烟气中三氧化硫反应产生的硫酸氢铵对预热器的影响,介绍了硫酸氢铵的形成机理,预热器内部堵灰的成因,以及采用搪瓷表面冷段传热元件、配置高压水冲洗设备、修改转子结构设计等对策。提供了冷段元件高度确定方法。
|
| 关 键 词： | 锅炉 脱硝 空气预热器 堵灰 搪瓷表面传热元件 高压水冲洗 |
| 文章编号： | CN31-1508(2005)04-0008-05 |
| 修稿时间： | 2005-03-21 |
The Problem and Solution in Air Preheater Design for Boilers with De NOx Equipments |
| |
| CAI Ming-kun. The Problem and Solution in Air Preheater Design for Boilers with De NOx Equipments[J]. Boiler Technology, 2005, 36(4): 8-12 |
| |
| Authors: | CAI Ming-kun |
| |
| Affiliation: | CAI Ming-kunShanghai Boiler Works,Ltd.,Shanghai 200245,China |
| |
| Abstract: | This text tells when the boiler mounted De NO_x device (SCR or SNCR), remained ammonia reacting with the sulfur trioxide and formed Ammonium Bisulfate, cause the problem of air preheater element surface fouling. Give the explain of the reason of the preheater plugging, and the experience of using enamel coating element as cold end heating exchanging surface, clean by a high-pressure water and steam dual-media soot blower, adjusting the inner structural of preheater rotor , etc. In the design of air preheater. Give the principle of determine the height of cold end element layer. |
| |
| Keywords: | boiler De NO_x air preheater fouling enamel coated heat element high pressure water washing |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
