Effect of geometrical parameters of draft tubes and clear liquid height on gas holdup in a bubble column for gas dispersion into tubes

The effects of the geometrical parameters of draft tubes and the clear liquid height on the average gas holdup E_G in a 0.16 m I.D. bubble column for gas dispersion into the tubes were experimentally studied in an airtap water system. The gas holdup depended on the superficial gas velocity U(ING), the kinds of gas spargers, the diameter and length of the draft tubes, clearance C_b between the lower end of the draft tube and the bottom of the bubble column, and the clear liquid height H_L. E_G increased with decreasing hole diameter of the gas sparger at a small gas velocity U_G, but did not depend on the kinds of gas spargers at a large U_G. E_G decreased with increasing clear liquid height H_L. The effect of H_L on E_G was well expressed by the modified three-region model. The experimental data of E_G were correlated.