Platinum Oxidation and Sulphur Deactivation in NOx Storage Catalysts

Flow reactor experiments and X-ray photoelectron spectroscopy (XPS) measurements were used to investigate the importance of platinum oxide formation on Pt/BaO/Al₂O₃ NO_x storage catalysts during reactions conditions. The reaction studied was NO(g) + 1/2 O₂(g) NO₂(g). During NO₂ exposure of the catalyst the NO₂ dissociation rate decreased during the reaction. This activity decrease with time was also studied with XPS and it was found to be due to platinum oxide formation. The influence of sulphur exposure conditions on the performance of the NO_x storage catalysts was studied by exposing the samples to lean and/or rich gas mixtures, simulating the conditions in a mixed lean application, containing SO₂. The main results show that all samples are sensitive to sulphur and that the deactivation proceeds faster when SO₂ is present in the feed under rich conditions than under lean or continuous SO₂ exposure. Additionally, the influence of the noble metals present in the catalysts was investigated regarding sulphur sensitivity and it was found that a combination of platinum and rhodium seems to be preferable to retain high performance of the catalyst under SO₂ exposure and subsequent regeneration. Finally, the behaviour of micro-fabricated model NO_x storage catalysts was studied as a function of temperature and gas composition with area-resolved XPS. These model catalysts consisted of a thin film of Pt deposited on one-half of a BaCO₃ pellet. It was found that the combination of SO₂ and O₂ resulted in migration of Pt on the BaCO₃ support up to one mm away from the Pt/BaCO₃ interface.