| 拉延筋约束阻力的一种解析计算方法 |
| |
| 引用本文： | 徐丙坤,施法中.拉延筋约束阻力的一种解析计算方法[J].锻压技术,2001,26(6):11-13. |
| |
| 作者姓名： | 徐丙坤 施法中 |
| |
| 作者单位： | 北京航空航天大学, |
| |
| 基金项目： | 国家 8 63/CIMS主题单元目标产品项目 (863 51 1 82 0 0 2 0 )资助 |
| |
| 摘 要： | 根据虚功原理和对板料在拉延筋处变形的分析，得到平均外力的计算公式，然后参考Levy方法提出了一种计算拉延筋约束阻力的参数拟合公式，并根据试验得到参数值。公式中考虑了材料的各向异性和应变速率敏感性。通过将计算结果与Nine的试验结果进行对比，证明了该计算方法对各种材料的有效性。
|
| 关 键 词： | 板料成形 等效拉延筋 拉延筋约束阻力 各向异性 应变速率敏感 |
A mathematical computation method for drawbead restraining force |
| |
| Beijing University of Aeronautics and Astronautics,Xu Bingkun,Shi Fazhong.A mathematical computation method for drawbead restraining force[J].Forging & Stamping Technology,2001,26(6):11-13. |
| |
| Authors: | Beijing University of Aeronautics and Astronautics Xu Bingkun Shi Fazhong |
| |
| Affiliation: | Beijing University of Aeronautics and Astronautics Xu Bingkun Shi Fazhong |
| |
| Abstract: | Based on the virtual work principle and analysis to drawbead deformation,the average resulting force is calculated.Then a parameter fitting formula for drawbead restraining force calculation is proposed by using Levy's method for reference.Parameters can be determined by experiment.Anisotropy and strain rate sensitivity are taken into account in the formula.The calculated results are compared with Nine's experimental results and the validation of this computation method to different materials is verified. |
| |
| Keywords: | Sheet metal forming Equivalent drawbead Drawbead restraining force Anisotropy Strain rate sensitivity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
