| 基于干膜的表面织构微沟槽阵列电解加工研究 |
| |
| 引用本文： | 薛腾,朱嘉澄,钱彩虹,钱文清,王开淼. 基于干膜的表面织构微沟槽阵列电解加工研究[J]. 电加工与模具, 2017, 0(4). DOI: 10.3969/j.issn.1009-279X.2017.04.011 |
| |
| 作者姓名： | 薛腾 朱嘉澄 钱彩虹 钱文清 王开淼 |
| |
| 作者单位： | 南京航空航天大学机电学院,江苏南京,210016 |
| |
| 基金项目： | 国家级大学生创新创业训练计划项目 |
| |
| 摘 要： | 沟槽在耐磨减磨、热能交换、改善润滑等方面具有良好的效果。采用基于干膜的表面织构阵列电解加工技术,并根据沟槽的结构特点,制定沟槽加工工艺流程,搭建相关实验系统。研究结果表明:基于干膜的掩模电解加工技术可加工出形貌良好的沟槽。
|
| 关 键 词： | 沟槽阵列 干膜 电解加工 光刻电解加工 |
Study on Electrochemical Machining of Micro-groove Arrays Using Dry-film Mask |
| |
| XUE Teng,ZHU Jiacheng,QIAN Caihong,QIAN Wenqing,WANG Kaimiao. Study on Electrochemical Machining of Micro-groove Arrays Using Dry-film Mask[J]. Electromachining & Mould, 2017, 0(4). DOI: 10.3969/j.issn.1009-279X.2017.04.011 |
| |
| Authors: | XUE Teng ZHU Jiacheng QIAN Caihong QIAN Wenqing WANG Kaimiao |
| |
| Abstract: | That micro-grooves have good effect in reducing the friction and wear of contacted friction pair surfaces,enhancing heat transfer and improving lubrication properties. A new method is proposed to fabricate surface textures by using through-mask electrochemical machining with dry-film mask. According to the profiles of micro-grooves ,a process of fabricating the micro-grooves and the relevant test system are set up. The experimental results verify that it is feasible to fabricate micro-grooves with good profiles by through-mask electrochemical machining using the dry-film mask. |
| |
| Keywords: | groove arrays dry-film mask ECM photoetching electrochemical machining |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
