首页 | 本学科首页   官方微博 | 高级检索  
     

双束熔体原位复合法制备Cu-TiB2合金的热力学与动力学
引用本文:郭明星,汪明朴,申坤,张真,李树梅. 双束熔体原位复合法制备Cu-TiB2合金的热力学与动力学[J]. 中国有色金属学报, 2007, 17(9): 1440-1446
作者姓名:郭明星  汪明朴  申坤  张真  李树梅
作者单位:中南大学,材料科学与工程学院,长沙,410083
基金项目:国家高技术研究发展计划(863计划);中南大学博士研究生创新选题资助项目
摘    要:介绍双束熔体原位复合法制备Cu—TiB2弥散强化铜合金的原理,并对其反应热力学和动力学进行研究。计算结果表明:Cu—B和Cu—Ti合金熔体碰撞时最容易形成TiB2相;TiB粒子的形核数量随反应扩散深度的降低和母合金溶质元素浓度的增加而增加;形核数量的增加有利于获得纳米级的TiB2粒子,但增加母合金溶质元素浓度容易出现粒子团聚长大现象。据此分析了如何设计反应器形状以及反应条件的选择。

关 键 词:Cu-TiB2合金  原位反应  热力学  动力学
文章编号:1004-0609(2007)09-1440-07
收稿时间:2007-01-05
修稿时间:2007-07-02

Thermodynamics and kinetics of in-situ reaction of double-beam melts for preparing Cu-TiB2 alloys
GUO Ming-xing,WANG Min-gpu,SHEN Kun,ZHANG Zhen,LI Shu-mei. Thermodynamics and kinetics of in-situ reaction of double-beam melts for preparing Cu-TiB2 alloys[J]. The Chinese Journal of Nonferrous Metals, 2007, 17(9): 1440-1446
Authors:GUO Ming-xing  WANG Min-gpu  SHEN Kun  ZHANG Zhen  LI Shu-mei
Affiliation:School of Materials Science and Engineering, Central South University, Changsha 410083, China
Abstract:The principle of preparing TiB2 dispersion strengthened copper alloys by the method of in-situ reaction of double-beam melts was introduced. The thermodynamics and kinetics of in-situ reaction were also investigated. The results show that, it is easy to form TiB2 phase as Cu-B and Cu-Ti alloy melts impact each other; with the decrease of reaction diffusion depth and increase of solute element concentration of master alloy, the number of nucleation will be raised; the increase of nucleation number is favorable to the formation of nano TiB2 particles, however, the increase of solute element concentration of master alloy is very likely to cause the aggregation of TiB2 particles. Accordingly, the design of reactor and the selection of reaction conditions were analyzed.
Keywords:Cu-TiB2 alloy   in-situ reaction   thermodynamics   kinetics
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号