| 车削薄壁套零件产生的问题及解决方法 |
| |
| 引用本文： | 李慧燕. 车削薄壁套零件产生的问题及解决方法[J]. 装备制造技术, 2007, 0(7): 108-109,116 |
| |
| 作者姓名： | 李慧燕 |
| |
| 作者单位： | 广西机电职业技术学院,广西,南宁,530007 |
| |
| 摘 要： | 在车削薄壁套零件时,由于零件壁薄、刚性差、强度低,容易产生变形与振动,影响零件的尺寸精度,形位精度和表面粗糙度。由此提出几种解决方法来控制车削薄壁套零件产生的变形与振动。
|
| 关 键 词： | 薄壁套零件 车削 振动 变形 |
| 文章编号： | 1672-545X（2007）07-0108-02 |
| 修稿时间： | 2007-05-13 |
The Problems Comes from Turning Thin-Walled Parts and Its Solution |
| |
| LI Hui-yan. The Problems Comes from Turning Thin-Walled Parts and Its Solution[J]. , 2007, 0(7): 108-109,116 |
| |
| Authors: | LI Hui-yan |
| |
| Affiliation: | Guangxi Technological College of Machinery and Electricity, Nanning 530007, China |
| |
| Abstract: | Because of the thin-walled, poor rigidity and low intensity, it is very easy causing vibration and distortion when turning thin-walled parts, so that the precision of dimension, geometrical accuracy and surface roughness of the parts are affected. The relative solutions were proposed to control the vibration and distortion in the process of turning. |
| |
| Keywords: | Thin-walled part Turning Vibration Distortion |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
