Effect of pH and addition of corn oil on the properties of whey protein isolate-based films using response surface methodology

Response surface methodology (RSM) was used to investigate pH and corn oil (CO) effects on the properties of films formed from whey protein isolate (WPI). Test films were evaluated for tensile strength (TS), puncture strength (PT), percentage elongation at break point (E), water vapour permeability (WVP) and oxygen permeability (OP). TS of WPI films increased with increasing pH, while addition of CO produced no trend. However, when WPI solution pH increased >10.0, film TS generally decreased with CO addition (>11%). E values increased dramatically with increasing levels of CO when pH for WPI solutions were >8.5. However, pH had no effect on E values. WPI solutions possessing high pH values (maximum pH value of 10.62) produced WPI films with the highest PT values. WVP had a quadratic relationship with pH and CO addition. OP had an inversely linear relationship with increasing pH (6.5–10.5) and a quadratic relationship with CO addition. Optimal pH (9.88) and CO level (2.93%), determined from physical test film data, were predicted by RSM.