| 罗茨风机铝合金扭叶形三叶轮的参数化设计 |
| |
| 引用本文： | 黄明宇,倪红军,朱昱,张兰存. 罗茨风机铝合金扭叶形三叶轮的参数化设计[J]. 轻合金加工技术, 2006, 34(11): 48-50 |
| |
| 作者姓名： | 黄明宇 倪红军 朱昱 张兰存 |
| |
| 作者单位： | 南通大学,江苏,南通,226007;南通大学,江苏,南通,226007;南通大学,江苏,南通,226007;南通大学,江苏,南通,226007 |
| |
| 基金项目： | 江苏省南通市科技局资助项目;南通大学校科研和教改项目 |
| |
| 摘 要： | 介绍了应用Pro/E软件,对罗茨风机的扭叶形三叶轮进行参数化设计。应用Pro/E能通过输入叶轮不同段的参数方程,自动绘制出复杂的叶轮齿形,并进行三维实体造型,同时改变设计参数就能方便地改变叶轮齿形。对设计出的叶轮还能进行啮合模拟、干涉检查、叶轮配合间隙测量、面积利用系数计算等,大大提高了设计效率和设计精度,解决了常规设计方法很难或无法实现的一些问题。
|
| 关 键 词： | 罗茨风机 扭叶 三叶轮 Pro/E软件 |
| 文章编号： | 1007-7235（2006）11-0048-03 |
| 收稿时间： | 2006-07-03 |
| 修稿时间： | 2006-07-03 |
Design of the aluminum alloy twist gear wheel with three tooth used in roots rotors blower based on parameterization |
| |
| HUANG Ming-yu,NI Hong-jun,ZHU Yu,ZHANG Lan-chun. Design of the aluminum alloy twist gear wheel with three tooth used in roots rotors blower based on parameterization[J]. Light Alloy Fabrication Technology, 2006, 34(11): 48-50 |
| |
| Authors: | HUANG Ming-yu NI Hong-jun ZHU Yu ZHANG Lan-chun |
| |
| Affiliation: | Nantong University, Nantong 226007, China |
| |
| Abstract: | The design of the twist gear wheel with three tooth used in Roots Rotors Blower based on Pro/E is introduced.To input the parameter equation different segment for gear wheel and then design the difficult dentiform of gear wheel automatically and do 3D model sculpt at the same time.Changing the design parameter can change gear wheel dentiform convenience.To designed gear wheel can also do athletic simulation,intervene examine,measure the tie in the two wheel,count the utilization factor of the area and so on.Process the designing efficiency and precision,work out some questions and difficult to solve by general idea. |
| |
| Keywords: | Roots Rotors blower twist gear wheel gear wheel with three tooth Pro/E |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
