A numerical study of unidirectional solidification of a binary metal alloy under influence of a rotating magnetic field |
| |
| Affiliation: | 1. Department of Materials and Mechanical Engineering, Buein Zahra Technical University, 3451745346, Qazvin, Iran;2. School of Engineering, Jönköping University, PO Box 1026, 551 11 Jönköping, Sweden;3. Department of Mechanical Engineering, Faculty of Engineering, University of Ottawa, Ontario, K1N 6N5, Canada;4. École Polytechnique de Montréal, Dép. de Génie Chimique, P.O. Box 6079, Centre-ville, Montreal, Quebec, H3C 3A7, Canada;1. School of Material Science and Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China;2. State Key Laboratory of Structure Analysis for Industrial Equipment, Department of Engineering Mechanics, Faculty of Vehicle Engineering and Mechanics, Dalian University of Technology, Dalian 116024, China;3. Chongqing Yuejin Machinery Plant Co.,Ltd, Chongqing, China;1. SIMAP/EPM, 1340 rue de la piscine, F-38402, Saint Martin dHeres Cedex, France;2. Silicor Materials, 1 royal gate boulevard, Vaughan, Canada;1. Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China;2. National Center of Novel Materials for International Research, Tsinghua University, Beijing 100084, China;3. State Key Laboratory of Tribology, Tsinghua University, Beijing 100084, China;4. School of Aerospace, Tsinghua University, Beijing 100084, China |
| |
| Abstract: | In this paper we present a numerical study of the fluid flow during directional solidification of a binary alloy (Pb85wt%Sn) in presence of a forced convection. The latter is driven by a rotating magnetic field (RMF) the strength of which, expressed by the magnetic Taylor number, varies between 104 < Ta < 2 × 106. The focus of this paper is the problem when cooling starts simultaneously with the acceleration of the melt from a state of rest. Thus, we study the interference of the so-called spin-up problem with the solidification of the melt. The numerical simulations are based on a mixture model formulation. We show that three distinct fluid flow phases exist. During the first two phases (initial adjustment and inertial phase) the acceleration of the liquid takes place which occurs in close similarity to the isothermal spin-up P.A. Nikrityuk, M. Ungarish, K. Eckert, R. Grundmann, Spin-up of a liquid metal flow driven by a rotating magnetic field in a finite cylinder. A numerical and analytical study, Phys. Fluids 17 (2005) 067101]. The third phase is characterized by a braking of the fluid flow due to the progressive solidification increasing the aspect ratio of the liquid (2R0/Hl) and decreasing the forcing. We show that as soon as the velocity of the secondary flow exceeds the velocity of the solidification front, a convex shape of the mushy zone can be observed. In parallel, Taylor–Görtler vortices advected by the secondary flow towards the mushy zone might impose a wavy substructure on the latter. At the end, predictions with respect to heat flux and macrosegregations are given. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
