| TMS320C6713基于DSP/BIOS的二级BootLoader开发 |
| |
| 引用本文： | 胡海龙,彭启琮.TMS320C6713基于DSP/BIOS的二级BootLoader开发[J].现代电子技术,2005,28(15):74-75,78. |
| |
| 作者姓名： | 胡海龙 彭启琮 |
| |
| 作者单位： | 电子科技大学,通信与信息工程学院,四川,成都,610054 |
| |
| 摘 要： | 当TMS320C6713工作于EMIF引导模式并且程序代码超过1kB时，就需要开发用户引导程序即二级BootLoader将程序代码完整地拷贝至DSP片内RAM。简要介绍了二级BootLoader及其引导过程，详细说明了开发二级BootLoader的4个步骤，重点介绍了其基于DSP／BIOS的开发过程。最后给出了在实际开发过程中可能遇到的问题及其解决办法。
|
| 关 键 词： | 二级BootLoader DSP／BIOS 引导 DSP |
| 文章编号： | 1004-373X(2005)15-074-02 |
Development of a Second-level BootLoader Based on DSP/BIOS on TMS320C6713 |
| |
| Hu Hailong,Peng Qicong.Development of a Second-level BootLoader Based on DSP/BIOS on TMS320C6713[J].Modern Electronic Technique,2005,28(15):74-75,78. |
| |
| Authors: | Hu Hailong Peng Qicong |
| |
| Abstract: | In the event TMS320C6713 is configured as EMIF boot process and the DSP application code size exceeds 1 kB a custom boot routine will need to be developed to copy the entire code to DSP on-chip RAM. The custom boot routine is referred to as the second-level BootLoader. This paper introduces second-level BootLoader and boot process in brief, describes in detail the four development procedures of a second-level BootLoader, particularly based on DSP/BIOS. At last, possible problem and solution is introduced to direct proper development. |
| |
| Keywords: | second-level BootLoader DSP/BIOS boot DSP |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
