首页 | 本学科首页   官方微博 | 高级检索  
     

超声导波技术在螺纹钢锚杆检测中的应用研究
引用本文:孙雅欣,何存富,吴斌,王秀彦,刘增华.超声导波技术在螺纹钢锚杆检测中的应用研究[J].工程勘察,2008(4).
作者姓名:孙雅欣  何存富  吴斌  王秀彦  刘增华
作者单位:北京工业大学机械工程与应用电子技术学院;
基金项目:国家自然科学基金资助项目(10602004); 北京市教委资助项目(KZ200510005004).
摘    要:本文分析了高频纵向超声导波在埋置于水泥中的螺纹钢锚杆中的传播特性,提出了有效计算直径的概念,指出在频散曲线计算中,对于螺纹钢锚杆应按照有效计算直径进行计算。并且在实验室及现场检测中验证了这一观点,为螺纹钢锚杆导波检测的工程应用打下一定基础,可供类似工程借鉴。

关 键 词:锚杆  超声导波  无损检测  

Inspection on Bolt with Thread Using Ultrasonic Guided Wave Technique
Sun Yaxin et al..Inspection on Bolt with Thread Using Ultrasonic Guided Wave Technique[J].Geotechnical Investigation & Surveying,2008(4).
Authors:Sun Yaxin
Abstract:The propagation characteristics of high frequency longitudinal ultrasonic guided waves of bolt with thread which is embedded in grout are studied in the paper.The available computing diameter is introduced in the computing about the disperse curves of bolt with thread.The results of laboratry and field inspection indicate that the disperse curves of bolt with thread should adopt the available computing diameter,which lay the foundation for the inspection of bolt with thread using ultrasonic guided waves.
Keywords:bolt  ultrasonic guided waves  nondestructive testing  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号