| 狮子山铜矿中深孔爆破参数优化设计研究 |
| |
| 引用本文： | 沈慧明,吴爱祥,余佑林,肖雄,杨保华.狮子山铜矿中深孔爆破参数优化设计研究[J].中国钼业,2003,27(1):14-17. |
| |
| 作者姓名： | 沈慧明 吴爱祥 余佑林 肖雄 杨保华 |
| |
| 作者单位： | 长沙市中南大学资源与安全工程学院,湖南,长沙,410083 |
| |
| 基金项目： | 国家自然科学基金项目资助(No .5 0 0 740 34)，高等学校优秀青年教师教学科研奖励计划资助 |
| |
| 摘 要： | 狮子山铜矿的中深孔爆破炸药单耗大 ,大块产出率高。本文在系列爆破漏斗试验的基础上 ,对该矿的爆破参数进行了优化设计研究。研究采用了国内外正广泛探讨的小抵抗线的爆破技术 ,在保持孔网面积S =a·Wd(孔间距×抵抗线 )和单位炸药消耗量基本不变的情况下 ,减小抵抗线Wd,增大孔间距a ,使炮孔的密集系数m(m =αWd)增大。适当变化a和Wd 的值 ,可使爆炸能充分利用 ,从而降低炸药单耗和大块率
|
| 关 键 词： | 中深孔 爆破参数 爆破漏斗 最小抵抗线 |
| 文章编号： | 1006-2602(2003)01-0014-04 |
| 修稿时间： | 2002年10月11 |
STUDY ON OPTIMIZATION DESIGN OF MEDIUM-LENGTH-HOLE BLASTING PARAMETERS IN SHIZISHAN COPPER MINE |
| |
| Shen Huiming,Wu Aixiang,Yu Youlin,Xiao Xiong,Yang Baohua.STUDY ON OPTIMIZATION DESIGN OF MEDIUM-LENGTH-HOLE BLASTING PARAMETERS IN SHIZISHAN COPPER MINE[J].China Molybdenum Industry,2003,27(1):14-17. |
| |
| Authors: | Shen Huiming Wu Aixiang Yu Youlin Xiao Xiong Yang Baohua |
| |
| Abstract: | The unit explosive consumption of medium-length-hole is large and the mass productivity is high in Shizishan copper mine. With the experiments of serious blasting filler, the blasting parameters of the mine are optimized in the paper. The blasting technique of diminishing burden is adopted here, which has been researched broadly at home and abroad. Under the conditions of the area of holes' mesh and unit explosive consumption invariable, the density factor of holes is increased by diminishing burden and increasing space. Changing the value of a and W d properly, the explosive energy can be made full use, as a result, both unit explosive consumption and mass productivity are decreased. |
| |
| Keywords: | Medium-length-hole Blasting parameters Blasting filler Minimal burden |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
