首页 | 本学科首页   官方微博 | 高级检索  
     

W-Ni-Fe系机械合金化过程中的相变及热力学和动力学研究
引用本文:张中武,周敬恩,席生岐,李鹏亮,张文兴,冉广.W-Ni-Fe系机械合金化过程中的相变及热力学和动力学研究[J].稀有金属材料与工程,2004,33(10):1045-1048.
作者姓名:张中武  周敬恩  席生岐  李鹏亮  张文兴  冉广
作者单位:西安交通大学,陕西,西安,710049
摘    要:W,Ni,Fe粉末按照91.16W6.56Ni2.28Fe的成分配比进行机械合金化(MA)。用XRD确定物相,用TEM(JEM-2000CX型)观察微观形貌和显微结构。并对机械合金化粉末的物相、颗粒尺寸、晶格畸变作了分析讨论。MA可以使W-Ni-Fe系形成纳米晶超饱和固溶体和非晶。参照Miedema半经验理论模型,计算了该合金系的相变驱动力,热力学分析指出该合金系不存在发生非晶化反应的化学驱动力。应用固态反应模型解释了MA过程非晶形成的热力学可能性,在MA过程中,非晶的形成并不绝对要求体系ΔHmix<<0和DB>>DA

关 键 词:机械合金化  非晶  热力学  固态多层反应  W-Ni-Fe系
文章编号:1002-185X(2004)10-1045-04
修稿时间:2003年3月3日

Studies on Thermodynamic and Kinetic and Phase Evolution of W-Ni-Fe Powder during Mechanical Alloying
Zhang Zhongwu,Zhou Jingen,Xi Shengqi,Li Pengliang,Zhang Wenxing,Rang guang.Studies on Thermodynamic and Kinetic and Phase Evolution of W-Ni-Fe Powder during Mechanical Alloying[J].Rare Metal Materials and Engineering,2004,33(10):1045-1048.
Authors:Zhang Zhongwu  Zhou Jingen  Xi Shengqi  Li Pengliang  Zhang Wenxing  Rang guang
Abstract:W6.56Ni2.28Fe tungsten heavy alloy from the elemental powders of W, Ni and Fe was mechanically alloyed(MA). Phase was defined by XRD. Microstructure was observed by TEM (JEM-2000 type). Phase evaluation, grain size and lattice distortion of these powders were determined and discussed. And nano-crystalline supersaturated solid solutions and amorphous were prepared by MA. A thermodynamic model was developed based on Miedema semi-experimental theory to calculate the driving force for phase evolution. The thermodynamic analysis showed that there is no chemical driving force to form amorphous alloys. The model of multilayer amorphization during MA was applied to illustrate the feasibility of amorphization of powder with neither ?Hmix << 0 nor DB >DA
Keywords:mechanical alloying  amorphous  thermodynamic  multilayer amorphization  W-Ni-Fe
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《稀有金属材料与工程》浏览原始摘要信息
点击此处可从《稀有金属材料与工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号