| PP/PA6/OMMT复合材料力学性能与结晶性能的研究 |
| |
| 引用本文： | 蒙日亮,伍玉娇,何辉,杨道义. PP/PA6/OMMT复合材料力学性能与结晶性能的研究[J]. 塑料科技, 2010, 38(3) |
| |
| 作者姓名： | 蒙日亮 伍玉娇 何辉 杨道义 |
| |
| 作者单位： | 1. 贵州大学材料与冶金学院,贵州,贵阳,550003;国家复合改性聚合物材料工程技术研究中心,贵州,贵阳,550014
2. 南方汇通股份有限公司铸造事业部,贵州,贵阳,550017 |
| |
| 基金项目： | 贵州省教育厅自然科学研究项目(黔教科(2009)0032)资助;;贵州省工业攻关项目(黔科合GY字(2006)3013)资助 |
| |
| 摘 要： | 采用3种不同有机改性过的蒙脱土(牌号为DK2,DK3,DK5)熔融插层法制备了PP/PA6/OMMT纳米复合物材料,在此基础上使用1%～7%的DK2的蒙脱土再次制备PP/PA6/OMMT纳米复合物材料,借助力学性能测试和差示扫描量热法(DSC)对体系的力学性能和结晶性能进行了研究。结果表明:使用DK2制备的复合材料的力学性能优于使用DK3和DK5制备的复合材料的力学性能;相对于纯PP,PP/PA6/OMMT纳米复合物材料随OMMT含量的增加,拉伸强度和弯曲强度是先增加后降低,最大下降幅度分别为8.7%和5.3%;冲击韧性一直上升达到9.61kJ/m2。OMMT的加入,对PP/PA6有异相成核的作用,提高PP/PA6的结晶速率和结晶度。
|
| 关 键 词： | 聚丙烯 尼龙-6 蒙脱土 熔融插层 力学性能 结晶 |
Research on Mechanical Properties and Crystallization Performance of PP/PA6/OMMT Composite |
| |
| Meng Riliang,,Wu Yujiao,He Hui,Yang Daoyi-.School of Materials , Metallurgical Engineering,Guizhou University,Guiyang ,China .National Engineering Research Center for Compounding , Modifi cation of Materials,Guiyang ,China .Casting Services Department,South Huiton Co.,Ltd.,Guiyang ,China. Research on Mechanical Properties and Crystallization Performance of PP/PA6/OMMT Composite[J]. Plastics Science and Technology, 2010, 38(3) |
| |
| Authors: | Meng Riliang Wu Yujiao He Hui Yang Daoyi-.School of Materials Metallurgical Engineering Guizhou University Guiyang China .National Engineering Research Center for Compounding Modifi cation of Materials Guiyang China .Casting Services Department South Huiton Co. Ltd. Guiyang China |
| |
| Affiliation: | Meng Riliang1,2,Wu Yujiao1,He Hui1,Yang Daoyi3-1.School of Materials , Metallurgical Engineering,Guizhou University,Guiyang 550003,China 2.National Engineering Research Center for Compounding , Modifi cation of Materials,Guiyang 550014,China 3.Casting Services Department,South Huiton Co.,Ltd.,Guiyang 550017,China |
| |
| Abstract: | The polypropylene/polyamid6/montmorillonite(PP/PA6/OMMT) nanocomposites were prepared by the melt intercalation with three different grades of organized montmorillonites.On the basis,nanocomposites were prepared again with content of DK2 montmorillonite from 1% to 7%.The mechanical properties and crystallization performance of nanocomposites were respectively investigated using mechanical property test and differential scanning calorimetry (DSC).The results showed that the mechanical properties of nanocompo... |
| |
| Keywords: | Polypropylene Polyamid6 Montmorillonite Melt Intercalation Mechanical properties Crystallization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
