| 基于视觉测量的绗缝加工智能控制 |
| |
| 引用本文： | 唐露新,刘志远,吴黎明,关建和. 基于视觉测量的绗缝加工智能控制[J]. 机床与液压, 2006, 0(7): 181-183 |
| |
| 作者姓名： | 唐露新 刘志远 吴黎明 关建和 |
| |
| 作者单位： | 广东工业大学信息工程学院,广东,广州,510643;广东工业大学信息工程学院,广东,广州,510643;广东工业大学信息工程学院,广东,广州,510643;广东工业大学信息工程学院,广东,广州,510643 |
| |
| 摘 要： | 根据绗缝加工中布料容易变形的特点，提出了计算机视觉测量闭环控制方法，采用该方法能动态跟踪加工运动轨迹并进行图像数字处理。通过建立布料变形的数学模型，对变形前后两加工轨迹图进行快速相关计算．得到最小相关系数，并求得位置偏差补偿值，实现了绗缝加工智能控制。
|
| 关 键 词： | 绗缝加工 视觉测量 图像处理 智能控制 |
| 文章编号： | 1001-3881(2006)7-181-3 |
| 收稿时间： | 2005-09-09 |
| 修稿时间： | 2005-09-09 |
Quilting Intelligent Control Based on Vision Measurement |
| |
| TANG Luxin,LIU Zhiyuan,WU Liming,GUAN Jianhe. Quilting Intelligent Control Based on Vision Measurement[J]. Machine Tool & Hydraulics, 2006, 0(7): 181-183 |
| |
| Authors: | TANG Luxin LIU Zhiyuan WU Liming GUAN Jianhe |
| |
| Affiliation: | Guangdong University of Technology, Guangzhou Guangdong 510643, China |
| |
| Abstract: | According to the characteristic that material warps easily in quilting, the closed- loop control method of computer vision measurement was presented. This method trail processing sport locus and carry out digital image processing. Through the establishment of warped mathematics model of cloth, can carry out fast related calculation as deformed around two processing locus picture, get minimum correlation coefficient and location deviation compensation value, so the intelligent control in quilting was realized. |
| |
| Keywords: | Quilting Vision measurement Image processing Intelligence control |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
