Thermal and electrical behaviour of some hybrid polyimide films containing barium and titanium oxides |
| |
Authors: | Corneliu Hamciuc Elena Hamciuc Marius Olariu Romeo Ciobanu |
| |
Affiliation: | 1. ‘Petru Poni’ Institute of Macromolecular Chemistry, Aleea Gr Ghica Voda 41A, Iasi 700487, Romania;2. ‘Gh Asachi’ Technical University, Electrical Engineering Faculty, Department of EMEM, B‐dul D Mangeron 53‐55, Iasi 700050, Romania |
| |
Abstract: | Aromatic polyimides are high‐performance polymers used in applications demanding service at enhanced temperature while maintaining their structural integrity and excellent combination of chemical, physical and mechanical properties. The incorporation of various metallic additives into a polyimide matrix improves its properties, leading to materials required by specific applications. Hybrid polyimide films containing barium and titanium oxides having thicknesses in the range of tens of micrometres were prepared. These films were obtained using the sol–gel technique starting from a poly(amic acid) and a soluble precursor of metal oxides. They exhibited good thermal stability having an initial decomposition temperature above 460 °C, and a glass transition temperature in the range 217–238 °C. Two subglass transitions, γ and β, were evident from dynamic mechanical analysis and dielectric spectroscopy. A study of the thermal and electrical behaviour of some hybrid polyimide films containing barium and titanium oxides is presented. On increasing the concentration of metal oxides, an increase of dielectric constant and a decrease of thermal stability of the hybrid films were observed. The presence of metal oxides shifted the glass transition temperature and the temperature of the β transition to higher values. Copyright © 2009 Society of Chemical Industry |
| |
Keywords: | polyimides thin films composites thermal stability dielectric properties |
|
|