| 光整加工深孔进水口大型缸体孔 |
| |
| 引用本文： | 陆志宽.光整加工深孔进水口大型缸体孔[J].制造技术与机床,2003(5):59-60. |
| |
| 作者姓名： | 陆志宽 |
| |
| 作者单位： | 武进液压启闭机厂 |
| |
| 摘 要： | 介绍光整加工长江三峡工程深孔、进水口液压启闭机超大型液压缸体孔的工艺装备，大型珩磨头的设计，结构原理及其有关珩磨工艺。
|
| 关 键 词： | 液压启闭机 液压缸 珩磨头 光整加工 三峡工程 孔加工 |
About Finishing the Cylinder Rod Surface Used in the Three-Gorge Project |
| |
| LU Zhikuan.About Finishing the Cylinder Rod Surface Used in the Three-Gorge Project[J].Manufacturing Technology & Machine Tool,2003(5):59-60. |
| |
| Authors: | LU Zhikuan |
| |
| Affiliation: | Wujin Hydraulic Start_Stop Gear Works |
| |
| Abstract: | The text introduced the design, structural principle and concerned honing technology of the technical equipment_large honing head_for finishing the holes in super_large hydraulic cylinder for deep_hole, water inlet hydraulic start_stop gear of the Three_gorge Project. |
| |
| Keywords: | Finishing Cylinder with Super_long and Ultra_large Hole Diameter Large Honing Head |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
