硅热法炼镁节能还原炉研究 |
| |
引用本文: | 彭建平,冯乃祥,王紫千,王耀武,武小雷.硅热法炼镁节能还原炉研究[J].节能,2008,27(8). |
| |
作者姓名: | 彭建平 冯乃祥 王紫千 王耀武 武小雷 |
| |
作者单位: | 东北大学材料与冶金学院,辽宁,沈阳,110004 |
| |
摘 要: | 自行设计安装一台小型内电阻加热硅热法镁还原试验炉,加入工业用皮江法炼镁球团进行镁还原试验,得到能耗小于9kWh/kg-Mg、镁收率大于90%、还原反应周期小于180min的技术指标。与传统外加热的皮江法相比,内电阻加热硅热法炼镁在还原阶段的热效率提高4倍,反应周期大大缩短。
|
关 键 词: | 镁冶金 还原炉 内电阻加热 |
Saving energy test of the vacuum furnace for magnesium metallurgy |
| |
Abstract: | Vacuum furnace is the key plant for the silicothermic magnesium metallurgy.At present the retorts used in Pidgeon process are facing a crisis being eliminated because of low thermal efficiency and long production cycle.Some experiments for the production of magnesium from calcined dolomites were done on a novel vacuum furnace by using internal heating method.The results show that its magnesium yield exceed 90% with the working cycle of 180 min,and that its power consumption is below 9kWh/kg.So it is a kind of saving energy furnace for the silicothermic magnesium metallurgy. |
| |
Keywords: | magnesium metallurgy vacuum reduction furnace internal heating |
本文献已被 维普 万方数据 等数据库收录! |
|