| 渐开线零齿差内啮合齿轮副啮合过程动态仿真 |
| |
| 引用本文： | 李治,王世杰,陈明. 渐开线零齿差内啮合齿轮副啮合过程动态仿真[J]. 沈阳工业大学学报, 2002, 24(5): 361-363,366 |
| |
| 作者姓名： | 李治 王世杰 陈明 |
| |
| 作者单位： | 1. 沈阳工业大学,机械工程学院,辽宁,沈阳,110023
2. 辽宁省重点工程开发公司,辽宁,沈阳,110023 |
| |
| 摘 要： | 针对零齿差内啮合传动副理论在应用方面的局限性以及设计中遇到的问题，利用渐开线零齿差内啮合齿轮传动机构的齿廓曲线方程和运动学模型，计算出其齿形参数和基本尺寸，勾勒零齿差齿轮副主从动轮的齿廓，运用计算机图形学的二维图形变换方法，采用可视化编程语言Visual Basic进行零齿差内啮合齿轮传动机构的动态仿真。
|
| 关 键 词： | 齿轮副 啮合过程 零齿差 内啮合 图形变换 动态仿真 渐开线齿轮 |
| 文章编号： | 1000-1646(2002)05-0361-03 |
Dynamic simulation of involute zero-tooth-difference internal gear mechanism |
| |
| LI Zhi ,WANG Shi jie ,CHEN Ming. Dynamic simulation of involute zero-tooth-difference internal gear mechanism[J]. Journal of Shenyang University of Technology, 2002, 24(5): 361-363,366 |
| |
| Authors: | LI Zhi WANG Shi jie CHEN Ming |
| |
| Affiliation: | LI Zhi 1,WANG Shi jie 1,CHEN Ming 2 |
| |
| Abstract: | To identify the theory of involute zero-tooth-difference internal gear mechanism in practical application, dynamic simulation of the engagement process was carried out here with Visual Basic language and two-dimensional graphical transformation method. The tooth profile parameter and some basic geometric sizes were calculated with the tooth profile equations and kinematic model. The tooth contours of driving and driven gear have been drawn at the state of engagement. |
| |
| Keywords: | zero tooth difference internal gear mechanism graphical transformation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
