| 用环氧树脂灌注集电环的工艺研究 |
| |
| 引用本文： | 高华. 用环氧树脂灌注集电环的工艺研究[J]. 粘接, 2005, 26(5): 50-51 |
| |
| 作者姓名： | 高华 |
| |
| 作者单位： | 中国电子科技集团公司第二十研究所,陕西,西安,710068 |
| |
| 摘 要： | 用环氧树脂灌注集电环模块是雷达汇流环生产的一个重要环节,灌注体系配方的优劣,将直接影响集电环模块机械加工性能和电性能.首先从理论的角度分析了环氧树脂、固化剂、增韧剂、填料、促进剂的选用,确定了配方,并通过实践验证了其合理性,还结合实际工作中灌注后模块易出现的故障及解决措施进行了分析.
|
| 关 键 词： | 集电环 环氧树脂 灌注 |
| 文章编号： | 1001-5922（2005）05-0050-02 |
| 收稿时间： | 2005-04-15 |
| 修稿时间： | 2005-04-15 |
Process research of pouring collecting ring using epoxy resin |
| |
| GAO Hua. Process research of pouring collecting ring using epoxy resin[J]. Adhesion in China, 2005, 26(5): 50-51 |
| |
| Authors: | GAO Hua |
| |
| Affiliation: | CETC No. 20 Research Institute, Xi'an 710068,China |
| |
| Abstract: | Pouring collecting ring model lump using epoxy resin is an important link during the collecting ring production. The success or failure of compounding for pouring system is directly work in concert with the mechanical process and electronic ability of collecting ring model lump. At first, the choice principle of the epoxy resin, curing agent, flexibilizer, filler and promoter was theoretically analyzed . The compounding system was fixed and then its reasonability was experimentally verified. The common breakdown and its settle measures for the poured model lump in practical work were also analyzed. |
| |
| Keywords: | collecting ring epoxy resin pouring |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
