| 表面粗糙度对25Cr3MoA钢氮化层深度和组织的影响 |
| |
| 引用本文： | 古璟,周石桥.表面粗糙度对25Cr3MoA钢氮化层深度和组织的影响[J].热处理技术与装备,2013(5):38-40. |
| |
| 作者姓名： | 古璟 周石桥 |
| |
| 作者单位： | 中航工业南京机电液压工程研究中心,江苏南京211106 |
| |
| 摘 要： | 选取25Cr3MoA钢为研究对象，采用不同的机加工方式结合干湿吹砂的方法，制备了不同表面粗糙度的25Cr3MoA钢试样。测量钢的表面粗糙度，然后对不同粗糙度的钢进行氮化处理。测量显微维氏硬度和观察氮化层，研究粗糙度对氮化层深度和组织的影响，分析产生不同差异的原因。
|
| 关 键 词： | 表面粗糙度 氮化深度 显微组织 |
Effects of Surface Roughness on Depth and Microstructure of Nitride Case of 25 Cr3MoA Steel |
| |
| GU Jing,ZHOU Shi-qiao.Effects of Surface Roughness on Depth and Microstructure of Nitride Case of 25 Cr3MoA Steel[J].Heat Treatment Technology and Equipment,2013(5):38-40. |
| |
| Authors: | GU Jing ZHOU Shi-qiao |
| |
| Affiliation: | (Nanjing Engineering Institute of Aircraft System AVIC, Nanjing Jiangsu 211106, China) |
| |
| Abstract: | 25Cr3MoA steel was chosen as object of study in this paper. Different machining technologies combing with dry or wet sand blowing were used to prepare 25Cr3MoA steel sample with different surface roughness. The surface roughness of steel was tested, then steel with different surface roughness was nitri- ded. Vickers hardness was tested and the nitride case was observed. Effect of surface roughness on depth and microstructure of nitride case were researched, and reasons of differences were analyzed. |
| |
| Keywords: | surface roughness depth of the nitride case microstructure |
| 本文献已被 维普 等数据库收录！ |
