| Abstract: | Blends of an extrusion‐grade polyethylene and two different liquid crystalline polymers of Vectra type were prepared by melt mixing using poly(ethylene‐comethacrylic acid) as compatibilizer. Oxygen and water vapor permeability, transparency and welding strength of compression molded and film blown specimens were studied. The compression molded blends showed gas permeabilities conforming to the Maxwell equation assuming low permeability liquid crystalline polymer spheres in a high permeability polyethylene matrix. One of the liquid crystalline polymers with suitable rheological properties formed a more continuous phase in the film blown blends and a substantial decrease in oxygen and water vapor permeability was observed in these blends. The compression molded blends with 50% liquid crystalline polymer and some of blow molded blends showed very high gas permeabilities. It is believed that voids forming continuous paths through the structure were present in these samples. The blends showed significantly higher opacity than pure polyethylene. |
