| 基于数值优化的跨音速压气机动叶三维设计 |
| |
| 引用本文： | 伊卫林,黄鸿雁,韩万金. 基于数值优化的跨音速压气机动叶三维设计[J]. 燃气轮机技术, 2006, 19(2): 34-39 |
| |
| 作者姓名： | 伊卫林 黄鸿雁 韩万金 |
| |
| 作者单位： | 哈尔滨工业大学,能源科学与工程学院,哈尔滨,150001;哈尔滨工业大学,能源科学与工程学院,哈尔滨,150001;哈尔滨工业大学,能源科学与工程学院,哈尔滨,150001 |
| |
| 基金项目： | 高等学校博士学科点专项科研项目 |
| |
| 摘 要： | 实验验证了三维粘性流场求解程序,然后采用基于梯度法的数值优化程序对跨音压气机动叶积叠线进行优化设计,得到了弯掠结合的三维叶片,并对其进行了数值模拟及详细的流场分析.结果表明采用弯掠的三维动叶可以有效的改变叶片排内三维激波结构,降低尾迹损失,显著提高动叶的整体绝热效率,并使动叶具有更加良好的变工况性能.
|
| 关 键 词： | 压气机 弯掠动叶 N-S方程 数值优化设计 |
| 文章编号： | 1009-2889(2006)02-0034-05 |
| 修稿时间： | 2005-09-26 |
Three dimensional design of transonic compressor rotor using numerical optimization |
| |
| Yi Wei-lin,Huang Hong-yan,Han Wan-jin. Three dimensional design of transonic compressor rotor using numerical optimization[J]. Gas Turbine Technology, 2006, 19(2): 34-39 |
| |
| Authors: | Yi Wei-lin Huang Hong-yan Han Wan-jin |
| |
| Abstract: | The three dimensional Navier-Stokes code has been validated by comparing computation results with experimental data.A numerical optimization code has been applied to optimization design of stacking line of transonic compressor rotor blades and has gained an optimized blade combined curve with sweep.Numerical simulation and detailed flowfield analysis of the optimized blade has been carried out.The results indicate three dimensional swept-curved rotors can effectively change three dimensional shock wave structures in blade row,reduce wake losses and evidently enhance whole adiabatic efficiency.The results also show the optimized blade has fine off-design performance. |
| |
| Keywords: | compressor swept-curved rotor Blade Navier-Stokes equations numerical optimization design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
