| 基于ANSYS的钢网增强PE-HD力学性能的模拟分析与实验验证 |
| |
| 引用本文： | 孙佳楠,陈冰冰,金杨福,高增梁,钱欣. 基于ANSYS的钢网增强PE-HD力学性能的模拟分析与实验验证[J]. 中国塑料, 2010, 24(1): 56-58. DOI: 10.19491/j.issn.1001-9278.2010.01.013 |
| |
| 作者姓名： | 孙佳楠 陈冰冰 金杨福 高增梁 钱欣 |
| |
| 作者单位： | 浙江工业大学化材学院浙江工业大学化材学院高分子材料与工程研究所 |
| |
| 基金项目： | 浙江省重大科技专项资助(2008C01047-3) |
| |
| 摘 要： | 运用ANSYS有限元分析软件，构建钢网离散模型，对不同钢网结构增强的高密度聚乙烯（PE-HD）复合材料进行力学性能分析，通过对复合材料拉伸和弯曲模拟发现，钢网增强PE-HD复合材料的弹性模量随着钢丝直径的增加和试样宽度上钢丝排布数目增加而增加，达到纯PE-HD的4~9倍；弯曲模量也随着钢丝直径的增加和试样宽度上钢丝排布数目增加而增加，达到PE-HD的1~3倍。经验证，模拟数据与试验结果非常吻合。
|
| 关 键 词： | 钢网 ANSYS软件 力学性能 数值模拟 增强 高密度聚乙烯 |
| 收稿时间： | 2009-09-11 |
ANSYS Software Simulation of Mechanical Properties of Steel Skeleton Reinforced PE-HD and Its Experimental Verification |
| |
| SUN Jianan,CHEN Bingbing,JIN Yangfu,GAO Zengliang,QIAN Xin. ANSYS Software Simulation of Mechanical Properties of Steel Skeleton Reinforced PE-HD and Its Experimental Verification[J]. China Plastics, 2010, 24(1): 56-58. DOI: 10.19491/j.issn.1001-9278.2010.01.013 |
| |
| Authors: | SUN Jianan CHEN Bingbing JIN Yangfu GAO Zengliang QIAN Xin |
| |
| Affiliation: | SUN Jianan1,CHEN Bingbing2,JIN Yangfu1,GAO Zengliang2,QIAN Xin1(1.College of Chemical Engineering , Materials Science,Zhejiang University of Technology,Hangzhou 310014,China,2.College of Mechanical Engineering,China) |
| |
| Abstract: | Based on ANSYS finite element analysis software, steel mesh discrete models were formulated for simulating the mechanical properties of steel skeleton reinforced PE-HD composites. Both Young's and bending moduli of the composites increased with increasing diameter of the steel skeleton and mesh density. The calculated moduli agreed well with the experimental data. |
| |
| Keywords: | steel skeleton reinforcement high density polyethylene ANSYS software numerical simulation mechanical property |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国塑料》浏览原始摘要信息 |
|
点击此处可从《中国塑料》下载全文 |
