首页 | 本学科首页   官方微博 | 高级检索  
     

单缸膜片式气压隔振系统的自适应滑动模式控制设计
引用本文:高同辉,景东山.单缸膜片式气压隔振系统的自适应滑动模式控制设计[J].机床与液压,2016,44(23):108-112.
作者姓名:高同辉  景东山
作者单位:1. 平顶山工业职业技术学院自动化系,河南平顶山,467001;2. 平顶山教育学院机械系,河南平顶山,467001
摘    要:针对被动式气压隔振系统的低频隔振效果差的缺点,开发了以函数近似法为基础的自适应滑动控制算法应用于单缸膜片式气压隔振系统中,该测试系统利用NI公司的Lab VIEW的软硬件资源进行整合搭建硬件实验系统。该主动式气压隔振系统通过实验证明:在规则振动激发与不规则振动激发两种方式下,相对于被动式气压隔振系统,隔振层的振动量分别降低了34.6%和32.7%,隔振效果明显。

关 键 词:被动式  主动式  气压隔振  自适应滑模控制  LabVIEW

Adaptive Sliding Mode Control Design of Single Cylinder Diaphragm Pressure Isolation System
Abstract:Due to the poor low frequency vibration isolation performance for passive pressure vibration isolation system , adaptive sliding control algorithms based on function approximation was developed to be applied to the single cylinder diaphragm pressure Isola -tion system, and NI's LabVIEW was used to integrate hardware and software resources to build test system .Through the test of the ac-tive pressure vibration isolation system , it shows that in the two ways of regular vibration excitation and irregular vibration excitation , relative to passive pressure vibration isolation system , the amount of vibration in isolation layer is respectively decreased by 34.6%and 32.7%, vibration isolation effect is obvious .
Keywords:Passive  Active  Pressure isolation  Adaptive fuzzy sliding mode control  LabVIEW
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《机床与液压》浏览原始摘要信息
点击此处可从《机床与液压》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号