| 混粉电火花大面积精加工工艺效果的研究 |
| |
| 引用本文： | 索来春 郭永丰. 混粉电火花大面积精加工工艺效果的研究[J]. 制造技术与机床, 1999, 0(1): 24-26 |
| |
| 作者姓名： | 索来春 郭永丰 |
| |
| 作者单位： | 哈尔滨工业大学 |
| |
| 摘 要： | 介绍了悬浮粉末工作液电火花加工这一新技术,通过一定量的工艺试验分析总结了它的工艺规律,提出了这一技术适用化的改进措施。
|
| 关 键 词： | 悬浮粉末工作液 电火花加工 镜面加工 表面粗糙度 |
Results of Large Surface Fine Machining by EDM Mixed with Powder |
| |
| Suo Laichun,et al. Results of Large Surface Fine Machining by EDM Mixed with Powder[J]. Manufacturing Technology & Machine Tool, 1999, 0(1): 24-26 |
| |
| Authors: | Suo Laichun et al |
| |
| Abstract: | The surface roughness can be greatly improved by mixing some powders with the working fliud in electro discharge machining. A suitable solution for such technology is proposed, processing experiments and processing law is summarized by analysis. |
| |
| Keywords: | Powder Suspended Working Fluid EDM Mirror Machining Surface Roughness |
| 本文献已被 CNKI 维普 等数据库收录！ |
