| 采煤机行走机构与刮板输送机销轨啮合配套研究 |
| |
| 引用本文： | 刘占胜,马英.采煤机行走机构与刮板输送机销轨啮合配套研究[J].煤矿机械,2007,28(7):30-32. |
| |
| 作者姓名： | 刘占胜 马英 |
| |
| 作者单位： | 1. 中国煤矿工程机械装备集团公司,北京,100011
2. 辽宁工程技术大学,机械工程学院,辽宁,阜新,123000 |
| |
| 摘 要： | 应用渐开线-摆线复合齿轮作为采煤机的行走部,系统地阐述其形成原理及求出齿廓方程。同时利用齿廓法线法得出与该复合齿轮相配套的销轨齿廓方程。针对实际工况,对复合齿轮与销轨正确啮合状态进行分析,为实现高产、高效奠定基础。
|
| 关 键 词： | 渐开线-摆线复合齿轮 销轨 啮合 配套 |
| 文章编号： | 1003-0794（2007）07-0030-03 |
| 修稿时间： | 2007-03-13 |
Research on Matching of Walking Organization for Shearer and Pin-track for Scraper Conveyor |
| |
| LIU Zhan-sheng,MA Ying.Research on Matching of Walking Organization for Shearer and Pin-track for Scraper Conveyor[J].Coal Mine Machinery,2007,28(7):30-32. |
| |
| Authors: | LIU Zhan-sheng MA Ying |
| |
| Affiliation: | 1. China National Coal Mining Engineering Equipment GroupCorp., Beijing 100011, China; 2. Mechanical Department of Liaoning Technical University, Fuxin 123000, China |
| |
| Abstract: | Applied the inviolate - cycloid compound gear as the walking organization for shearer, systematically elaborated it which formed the principle and extracted the tooth profile equation. Meanwhile obtained the tooth profile equation of pin - track by the tooth profile normal law which matched the inviolate - cycloid compound gear. In view of the actual operating mode, analyzed the correct meshing condition to the compound gear and the pin- track, in order to realize the high production and highly effective has laid the foundation. |
| |
| Keywords: | inviolate-cycloid compound gear pin-track mesh matching |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
