首页 | 本学科首页   官方微博 | 高级检索  
     

两种不同气氛下钢铜摩擦副摩擦磨损特性研究
引用本文:王观民,张永振,杜三明.两种不同气氛下钢铜摩擦副摩擦磨损特性研究[J].热加工工艺,2006(12).
作者姓名:王观民  张永振  杜三明
作者单位:河南科技大学材料科学与工程学院 河南洛阳471003
基金项目:国家自然科学基金资助项目(50375046,50432020)
摘    要:利用MMS-1G销盘式高温高速摩擦磨损试验机,研究了氧气和二氧化碳两种气氛下CrNiMo钢/H96黄铜配副的干滑动摩擦磨损特性,并分析了其磨损机理。结果表明:摩擦系数随载荷和速度的增加而减小;磨损率随着载荷和速度的增加而增加,在改变速度与载荷的过程中,存在着摩擦磨损机制的转变,氧气气氛下,CrNiMo钢材料的磨损机理主要表现为氧化磨损、磨粒磨损;二氧化碳气氛下,CrNiMo钢材料的磨损机理主要表现为磨粒磨损、粘着磨损。

关 键 词:钢/铜摩擦副  氧气气氛  二氧化碳气氛  摩擦磨损  磨损机理

Study on Friction and Wear Characteristics of Steel-copper Couples in Double-duty Atmosphere of Oxygen and Carbon Dioxide
WANG Guan-min,ZHANG Yong-zhen,DU San-ming.Study on Friction and Wear Characteristics of Steel-copper Couples in Double-duty Atmosphere of Oxygen and Carbon Dioxide[J].Hot Working Technology,2006(12).
Authors:WANG Guan-min  ZHANG Yong-zhen  DU San-ming
Abstract:By using MMS-1G pin-disk high temperature and high speed friction and wear tester,the dry sliding friction and wear characteristics of CrNiMo steel-H96 copper couples in double-duty atmosphere of oxygen and carbon dioxide were studied,and its wear mechanism was analyzed.The results show that the frictional coefficients of CrNiMo decreases as the sliding speed and contacting pressure increase;the wear rates of CrNiMo increase as the contacting pressure and sliding speed increase.When the sliding speed and contacting pressure are changed,the friction and wear mechanism will be changed.The wear mechanisms of CrNiMo are mainly oxidation wear and abrasive wear in oxygen atmosphere;The wear mechanisms of CrNiMo are mainly abrasive wear and adhesive wear in carbon dioxide atmosphere.
Keywords:steel-copper couples  oxygen atmosphere  carbon dioxide atmosphere  friction and wear  wear mechanism
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号