| 基于单片机技术的胶印机数控墨斗控制系统的设计 |
| |
| 引用本文： | 张 琴,侯和平. 基于单片机技术的胶印机数控墨斗控制系统的设计[J]. 包装工程, 2012, 33(1): 86-87,104 |
| |
| 作者姓名： | 张 琴 侯和平 |
| |
| 作者单位： | 南京工程学院;西安理工大学 |
| |
| 基金项目： | 国家自然科学基金资助项目(60776056) |
| |
| 摘 要： | 根据胶印机出墨量数字控制要求及其工艺原理,设计了数控墨斗机械结构部分,并对胶印机墨斗进行了三维实体造型的设计,验证了墨斗设计的合理性。以单片机ATMEL-AT89S52作为控制元件,以步进电动机作为执行控制对象,设计了总体控制电路方案,制作出了系统的硬件控制系统,并根据调墨原理对控制系统编制了控制软件。
|
| 关 键 词： | 墨斗 单片机 步进电动机 |
| 收稿时间： | 2011-08-21 |
| 修稿时间： | 2012-01-10 |
Design of Control System for Numerical Control Ink Fountain of Offset Press Based on Singlechip Technology |
| |
| ZHANG Qin and HOU He-ping. Design of Control System for Numerical Control Ink Fountain of Offset Press Based on Singlechip Technology[J]. Packaging Engineering, 2012, 33(1): 86-87,104 |
| |
| Authors: | ZHANG Qin and HOU He-ping |
| |
| Affiliation: | ZHANG Qin1,HOU He-ping2(1.Nanjing Institute of Technology,Nanjing 211167,China;2.Xi’an University of Technology,Xi’an 710048,China) |
| |
| Abstract: | According to the requirements of numerical control of ink flow and its technology theorem,the mechanical structure of numerical control ink fountain and the three-dimensional solid model for offset press was designed.The rationality of ink fountain design was verified.Overall control circuit project were designed,the hardware control system was made using ATMEL-AT89S52 singlechip as control component,and using step motor as the implementation object.According to the principle of ink adjusting,control software for the control system was programmed. |
| |
| Keywords: | ink fountain singlechip step motor |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《包装工程》浏览原始摘要信息 |
|
点击此处可从《包装工程》下载全文 |
|
