首页 | 本学科首页   官方微博 | 高级检索  
     

均质压燃(HCCI)单区和多区燃烧模型的比较
引用本文:钟绍华,孔斌,Xu Hong-ming.均质压燃(HCCI)单区和多区燃烧模型的比较[J].内燃机工程,2007,28(3):6-10.
作者姓名:钟绍华  孔斌  Xu Hong-ming
作者单位:武汉理工大学,汽车工程学院,武汉,430070;英国伯明翰大学
基金项目:英国工程及自然科学基金委员会和贸工部联合资助项目
摘    要:利用耦合化学动力学软件包CHEMKIN建立了汽油HCCI发动机的单区和多区燃烧模型。与试验数据的对比表明:虽然单区模型在参数化研究中能较准确地预测混合气的自燃定时,但其准确性在很大程度上取决于缸内的均匀性;包含缝隙区、淬熄区、质量交换区和绝热核心区的九区燃烧模型通过设置特定的功能分区能更好地模拟HCCI的燃烧过程,它在对自燃定时的预测和对热量释放过程和排放物的形成机理的模拟等方面都有很好的性能。

关 键 词:内燃机  均质压燃  燃烧模型  单区模型  多区模型
文章编号:1000-0925(2007)03-006-05
修稿时间:2006-12-22

Comparison of Single-zone and Multi-zone Combustion Model for HCCI Engine
ZHONG Shao-hua,KONG Bin,Miroslaw Lech Wyszynski,XU Hong-ming.Comparison of Single-zone and Multi-zone Combustion Model for HCCI Engine[J].Chinese Internal Combustion Engine Engineering,2007,28(3):6-10.
Authors:ZHONG Shao-hua  KONG Bin  Miroslaw Lech Wyszynski  XU Hong-ming
Affiliation:1. School of Automotive Engineering, Wuhan University of Technology, Wuhan 430070,China 2. The University of Birmingham
Abstract:Based on the CHEMKIN chemical kinetics software package,a single-zone and a multi-zone combustion models for a gasoline homogeneous charge compression ignition(HCCI) engine were developed. By comparing with the experimental data obtained from a parallel experimental research project,the simula- ted results show that although the single-zone model can be used for predicting the trend of auto-ignition tim- ing variations in parameter studies,the predicting accuracy depends on the mixture uniformity in the cylin- der.The 9-zone model developed in this paper,which includes crevice zone,quench layer zone,mass ex- change zone and central core zone,can better simulate HCCI combustion process.It has good performance in predicting auto-ignition timing and simulating heat release process and emissions formation mechanism.
Keywords:IC engine  HCCI  combustion model  single-zone modelmulti-zone model
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号