Laser direct writing polymeric single-mode waveguide devices with a rib structure |
| |
Authors: | Das Alok K |
| |
Affiliation: | Department of Electronics and Telecommunication Engineering, Jadavpur University, Calcutta 700 032, India. alok_kumar_das@yahoo.com |
| |
Abstract: | A focused argon-ion laser beam is used on a spin-coated polymeric thin-film deposited upon a SiO2/Si substrate to polymerize the core for fabrication of Gaussian profile optical channel waveguides. A rib structure that allows only the fundamental mode to propagate even with its higher dimension and high-index contrast between the core and the cladding was fabricated. When the thickness of the core-index region outside the rib section decreases, the waveguide produces higher-order modes at the output. The waveguide reported here has cross-sectional dimensions and numerical apertures that match the single-mode fibers for efficient coupling. I used a mixture of two intermiscible acrylate monomers for the cladding and the core of the waveguides. The polymerization process and its dependent dwell time or scan speed and the laser power intensity are shown. I present the operational characteristics of directional couplers using a rib waveguide structure with a core-cladding index difference. |
| |
Keywords: | |
本文献已被 PubMed 等数据库收录! |
|