| 金属板料拉深成形工艺参数优化的正交试验研究 |
| |
| 引用本文： | 杨立军,党新安,任威. 金属板料拉深成形工艺参数优化的正交试验研究[J]. 制造技术与机床, 2006, 0(5): 26-29 |
| |
| 作者姓名： | 杨立军 党新安 任威 |
| |
| 作者单位： | 陕西科技大学机电工程学院,陕西,咸阳,712081 |
| |
| 摘 要： | 成形工艺参数影响金属板料的拉深成形性能,对多道次拉深的影响显著性因素也不一致。针对影响板料拉深成形性能的主要因素,运用正交试验方法确定出了影响首次和二次拉深成形性能的显著性因素。通过优化组合参数,提高了拉深成形效率。
|
| 关 键 词： | 板料成形 工艺参数 正交试验 优化 |
| 收稿时间： | 2005-07-14 |
| 修稿时间： | 2005-07-14 |
Research on the Optimization of Technological Parameters of Sheet Metal Drawing by Orthogonal Experiment |
| |
| YANG Lijun,DANG Xin'an,REN Wei. Research on the Optimization of Technological Parameters of Sheet Metal Drawing by Orthogonal Experiment[J]. Manufacturing Technology & Machine Tool, 2006, 0(5): 26-29 |
| |
| Authors: | YANG Lijun DANG Xin'an REN Wei |
| |
| Abstract: | The deformability of sheet metal drawing is influenced by technological parameters, and the key factors are varied in multi-stage sheet metal drawing. In view of the main factors effecting the deformability of sheet metal drawing, the key factors are decided by orthogonal experiment. The efficiency of drawing is increased by optimization of technological parameters. |
| |
| Keywords: | Sheet Metal Drawing Technological Parameters Orthogonal Experiment Optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
