|
|||||
|
|
| 攀钢板坯连铸机结晶器流场优化的水模拟研究 | |
| 引用本文： | 周一平,杨素波,严学模,戴云阁,张华书,彭暑东,吴伟.攀钢板坯连铸机结晶器流场优化的水模拟研究[J].钢铁钒钛,2002,23(1):1-5. |
| 作者姓名： | 周一平 杨素波 严学模 戴云阁 张华书 彭暑东 吴伟 |
| 作者单位： | 1. 攀钢(集团)公司,四川,攀枝花,617067 2. 攀枝花钢铁研究院,四川,攀枝花,617000 3. 东北大学材料冶金学院,辽宁,沈阳,110006 |
| 摘 要： | 在攀钢条件下对连铸板坯结晶器流场进行了水模拟实验，研究了拉速，结晶器宽度，水口结构等参数与结晶器流场，液面波动，流股行为及夹杂物上浮状况之间的关系。实验结果对板坯结晶器工艺参数优化和连铸生产有参考价值。 |
| 关 键 词： | 板坯连铸 结晶器 水模拟研究 工艺优化 |
| 文章编号： | 1004-7638(2002)01-0001-05 |
| 修稿时间： | 2002年1月8日 |
WATER-MODEL TEST ABOUT MOULD FLOWAGE OPITIMIZATION FOR SLAB CASTER AT PZH STEEL |
|
| ZHOU Yi-ping ,YANG Su-bo ,YAN Xue-mo ,DAI Yun-ge ,ZHANG Hua-shu ,PENG Shu-dong ,WU Wei.WATER-MODEL TEST ABOUT MOULD FLOWAGE OPITIMIZATION FOR SLAB CASTER AT PZH STEEL[J].Iron Steel Vanadium Titanium,2002,23(1):1-5. | |
| Authors: | ZHOU Yi-ping YANG Su-bo YAN Xue-mo DAI Yun-ge ZHANG Hua-shu PENG Shu-dong WU Wei |
| Affiliation: | ZHOU Yi-ping 1,YANG Su-bo 2,YAN Xue-mo 2,DAI Yun-ge 3,ZHANG Hua-shu 3,PENG Shu-dong 3,WU Wei 3 |
| Abstract: | Water-model test about mould flowage optimization was taken at PZH Steel slab caster.It was studied that effects of operating conditions such as continuous casting speed,mould width,nozzle structure etc.on mould flowage,level fluctuation,fluid behavior and floation of inclusions.The results are valuable for optimizing mould process parameter and continuous casting operation. |
| Keywords: | slab casting mould water-model test process optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |