首页 | 本学科首页   官方微博 | 高级检索  
     

含局部减薄缺陷管道的极限载荷分析
引用本文:何洁,刘永寿,苟兵旺,岳珠峰.含局部减薄缺陷管道的极限载荷分析[J].机械科学与技术(西安),2010(4).
作者姓名:何洁  刘永寿  苟兵旺  岳珠峰
作者单位:西北工业大学工程力学系;
基金项目:国家高技术研究发展专项(863计划)项目(2007AA04Z404);;陕西省自然科学基础研究计划项目(SJ08A17);;西北工业大学科技创新基金项目(2008KJ02019)资助
摘    要:建立了含缺陷管道失效的数值模型,采用非线性有限元方法对其极限载荷进行了研究,分析了局部减薄缺陷参数对管道极限载荷的影响,并将计算结果与API579准则的评价结果进行了对比,分析了二者产生差异的原因。研究结果表明,极限载荷随缺陷深度和缺陷长度的增加而呈明显下降趋势,但当缺陷长度达到一定值时,其继续增加对管道极限载荷的影响不再明显。缺陷长度较小时,有限元计算结果与API579准则给出的结果相吻合;缺陷深度和长度都较大时,API579准则并不适用。

关 键 词:缺陷管道  极限载荷  失效压力  有限元分析

Limit Load Analysis of Local Wall-thinning Defective Pipelines
He Jie,Liu Yongshou,Gou Bingwang,Yue Zhufeng.Limit Load Analysis of Local Wall-thinning Defective Pipelines[J].Mechanical Science and Technology,2010(4).
Authors:He Jie  Liu Yongshou  Gou Bingwang  Yue Zhufeng
Affiliation:He Jie,Liu Yongshou,Gou Bingwang,Yue Zhufeng
Abstract:In this paper,a numerical model of defective pipelines is established.The limit load of these pipelines is studied using nonlinear finite element method(FEA).The influence coefficients of the local wall-thinning pipelines are analyzed.The results are compared with those by the method of API579,which shows that limit loads decrease obviously when the depths and lengths of defect increase.However,when the length reaches a certain value,the effect is not remarkable.While the defective length is adequately smal...
Keywords:defective pipeline  limit load  failure pressure  FEA  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号