| 烧成工艺对CaCu3Ti4O12陶瓷介电性能的影响 |
| |
| 引用本文： | 倪维庆,俞建长,郑兴华,梁炳亮. 烧成工艺对CaCu3Ti4O12陶瓷介电性能的影响[J]. 电子元件与材料, 2006, 25(10): 26-29 |
| |
| 作者姓名： | 倪维庆 俞建长 郑兴华 梁炳亮 |
| |
| 作者单位： | 福州大学材料科学与工程学院,福建,福州,350002;福州大学材料科学与工程学院,福建,福州,350002;福州大学材料科学与工程学院,福建,福州,350002;福州大学材料科学与工程学院,福建,福州,350002 |
| |
| 基金项目： | 福州大学校科研和教改项目;福州大学校科研和教改项目;福建省青年科技人才创新基金 |
| |
| 摘 要： | 采用短时间烧结制备了CaCu3Ti4O12(CCTO)陶瓷,并详细研究了预烧温度、烧结温度等工艺对结构和性能的影响。研究了εr和tanδ随测试频率(20Hz～1MHz)、温度(25～150℃)的变化规律。结果表明:CCTO陶瓷的性能对烧成工艺非常敏感。较低的预烧温度较容易获得高εr(εr为11248)的CCTO陶瓷。
|
| 关 键 词： | 无机非金属材料 钙钛矿 介电性能 固相反应 CaCu3Ti4O12 |
| 文章编号： | 1001-2028（2006）10-0026-04 |
| 收稿时间： | 2006-04-20 |
| 修稿时间： | 2006-04-20 |
Effect of Sintering Process on Dielectric Properties of CaCu3Ti4O12 Ceramics |
| |
| NI Wei-qing,YU Jian-chang,ZHENG Xing-hua,LIANG Bing-liang. Effect of Sintering Process on Dielectric Properties of CaCu3Ti4O12 Ceramics[J]. Electronic Components & Materials, 2006, 25(10): 26-29 |
| |
| Authors: | NI Wei-qing YU Jian-chang ZHENG Xing-hua LIANG Bing-liang |
| |
| Affiliation: | College of Materials Science and Engineering, Fuzhou University, Fuzhou 350002, China |
| |
| Abstract: | CaCu3Ti4O12 (CCTO)ceramics were prepared by sintering short time. The effects of the process on crystal structure and dielectric properties of CCTO ceramics were investigated together with frequency and temperature dependence of dielectric properties in the range of 20 Hz～1 MHz and 25～150 ℃. The results show that these ceramics are very sensitive to the sintering process. CCTO ceramics with high dielectric constant are obtained easier by powder calcined at lower temperature. |
| |
| Keywords: | CaCu3Ti4O12 |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
