| 阻燃聚醚型单组分聚氨酯防水涂料的研制 |
| |
| 引用本文： | 王威,葛义,李超.阻燃聚醚型单组分聚氨酯防水涂料的研制[J].中国建筑防水,2014(24):22-24. |
| |
| 作者姓名： | 王威 葛义 李超 |
| |
| 作者单位： | 山东潍坊宏源防水材料有限公司,山东潍坊,262735 |
| |
| 摘 要： | 制备了接枝型阻燃聚醚多元醇,以此为原料制得了阻燃聚醚型单组分聚氨酯防水涂料。讨论了阻燃聚醚多元醇、游离—NCO含量对聚氨酯防水涂料力学性能的影响,研究了阻燃聚醚多元醇含量对聚氨酯防水涂料燃烧性能的影响。结果表明,阻燃聚醚多元醇可以提高聚氨酯防水涂料的拉伸强度和撕裂强度,但会降低其断裂伸长率;预聚体中—NCO含量控制在3.5%~4.0%时,制得的聚氨酯防水涂料力学性能最好;阻燃聚醚多元醇含量在25%以上时,制得的聚氨酯防水涂料具有良好的阻燃效果。
|
| 关 键 词： | 聚氨酯防水涂料 阻燃聚醚多元醇 力学性能 燃烧性能 |
Development of Flame-proof Polyether Type Single Component Polyurethane Waterproofing Coating |
| |
| Wang Wei
,
Ge Yi
,
Li Chao.Development of Flame-proof Polyether Type Single Component Polyurethane Waterproofing Coating[J].China Building Waterproofing,2014(24):22-24. |
| |
| Authors: | Wang Wei Ge Yi Li Chao |
| |
| Affiliation: | (Shandong Weifang Hongyuan Waterproof Materials Co., Ltd., Weifang, Shandong 262735, China) |
| |
| Abstract: | Flame-proof polyether type single component polyurethane waterproofing coating is prepared by using graft type flame-proof polyether polyol. The influences of flame-proof polyether polyol and content of free-NCO on mechanical properties of polyurethane waterproofing coating, and the influence of content of flame-proof polyether polyol on its combustion property are discussed. The results showed that flame-proof polyether polyol can increase the tensile and tearing strength of the coating but decrease its extension at break; the mechanical properties of the coating are the best when the content of free-NCO in prepolymer is 3.5%~4.0%; and the coating has good flame-proof effect when the content of flameproof polyether polyol is above 25%. |
| |
| Keywords: | polyurethane waterproofing coating flame-proof polyether polyol mechanical property combustion property |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
