| 轿车后纵梁制造误差的仿真与修正 |
| |
| 引用本文： | 王灵犀,毕磊.轿车后纵梁制造误差的仿真与修正[J].沈阳理工大学学报,2011,30(4):40-42,52. |
| |
| 作者姓名： | 王灵犀 毕磊 |
| |
| 作者单位： | 沈阳理工大学汽车与交通学院,辽宁沈阳,110159 |
| |
| 摘 要： | 首次提出利用三维扫描仪扫描后纵梁的点云,利用Geomagic Qualify软件对点云数据与CAD模型进行3D比较、2D比较、边界比较,检测出冲压件整体、边界、夹具点位置的误差,利用Ansys Workbench软件对后纵梁进行有限元分析和仿真,以夹紧点位移为边界条件,根据Qualify软件数据结果,将后纵梁压回标准状态。最后将压直后的结果与CAD模型对比,整体误差很小,证明调整量基本正确,以此调整实际夹具,修正有误差的后纵梁,获得了较好的效果.
|
| 关 键 词： | 逆向工程 Geomagic Qualify 冲压件 夹具 |
The Simulation and Correction of Rear Carling's Manufacturing Errors of A Car |
| |
| WANG Lingxi,BI Lei.The Simulation and Correction of Rear Carling's Manufacturing Errors of A Car[J].Transactions of Shenyang Ligong University,2011,30(4):40-42,52. |
| |
| Authors: | WANG Lingxi BI Lei |
| |
| Affiliation: | WANG Lingxi,BI Lei(Shenyang Ligong University,Shenyang 110159,China) |
| |
| Abstract: | This article firstly proposes to scan the point cloud of Rear Carling by three-dimensional scanner.Point cloud data is compared with 3D models about three-dimension,two-dimension and boundary based on Geomagic Qualify software.It examines the errors of stamping part's whole,boundary,feature in fixture points.It analyzes and simulates stamping part with FEA according to Ansys Workbench software,the clamp points'displacement is regarded as boundary conditions,it will press rear carling back to standard shape ... |
| |
| Keywords: | reverse engineering Geomagic Qualify stamping parts fixture |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
